For pulse settings - set pulse width 60%, peak current 100, background current 30, Hz 1.0 1/8' (.125) - pre-flow.1 sec., hot start 20, amperage 150, Hz 80, balance 20%, post-flow 6.0 sec.
I don't know if this helps or not but I pulled it from an owners manual. If you are using a remote then you would set the machine in standard for controlling output and also to AC output, HF tig, contactor and control in remote position. Thanks for choosing FixYa, Kelly Posted on Apr 03, 2011. Lid switch is item 19 this link: This information should help you resolve your problem. You should hear a click as the lid just opens or closes. If the windings of the solenoid check good then check the lid switch. (may have to drill out part of old rivet.) If the rivet is in place check the winding on the solenoids for continuity. The rivet actuates the slide bar to drop the spin tube onto the clutch so it will spin. If the rivet is sheared it woull not spin or pump out. Make sure the rivet (Item 46) is not sheared in that piece.
Here are the differences in these systems: I have some manuals for a Kenmore electric dryer that isnt. I am a new user who wants to share some manuals but I.
Check the one that goes to the slidebar that would acuate the pump. (Item 75 of link) There are 2 gliders / one under each solenoid. See this diagram: Open the back panel and look at the 2 solenoids that rock back and forth on the top of the transmission.
0 kommentar(er)
